AT2035-STUDIO BUNDLE

Audient, Audio Technica -

AT2035-STUDIO BUNDLE

Audio Technica & Audient Team Up to create THE ULTIMATE PROJECT STUDIO KIT, READY TO RECORD STRAIGHT OUT OF THE BOX!

Bringing an amazing recording bundle together with a fantastic price of just £334.99

 

 

Headphones
Type Dinámicos cerrados
Driver Diameter 40mm
Magnet Neodymium
Voice Coil CCAW (Copper-clad aluminum wire)
Maximum Input Power 1,600 mW @ 1KHz
Sensitivity 98 dB/mW
Impedance 35 ohms
Folding/collapsible Yes
Weight 240g (without cable)
Cable - Detachable Yes
Connector Gold-plated stereo 1/8” (3.5 mm) connector with 6.3 mm (1/4”) screw-on adapter
Accessories Included 6.3 mm (1/4”) screw-on adapter, Pouch
Microphone
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 20 - 20,000 Hz
Open Circuit Sensitivity -33 dB (22.4 mV) re 1V at 1 Pa
Impedance 120 ohms
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Low Frequency Roll Off 80 Hz, 12 dB/octave
Dynamic Range 136 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 3.8 mA typical
Weight 403g
Dimensions 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Audio Interface
Accessories Included https://audient.com/products-2/audio-interfaces/id4/tech-specs/